You will neeed:

• 9 beer bottle caps
• A piece of scrap wood (preferably a strong hardwood) approximatey 25cm x 6cm x 1cm
• 9 short screws no longer than the thickness of the wood
• Drill, screwdriver, saw and sandpaper

Step 1:

Drill a clearance hole for the screws in the centre of each beer bottle cap

Step 2 (optional):

Cut the wood into a tasteful fish shape or comfortable handle, and sand smooth any rough edges.

Step 3:

Screw the bottle caps to the wooden handle. Job done: cost - scrap bits; time - ten minutes to half an hour depending on how fancy the handle is!